|  |  | | Accuracy, versatility and to DIN 8606. Complete with 3 jaw chuck, live centre and thread cutting capability. | |  |  |
|
| | |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
|
| |  | | One each roughing out, parting, finishing cut, left and right cutter. | | | |
|
| |
| |  | | Three holders for roughing out (70mm), longitudinal work (70mm) and 90mm boring bar, holes from 12mm. | | | |
|
| | |  | | One cutter for external thread (ground to 608, metric) one for internal thread, one general cutting. | | | |
|
|
| |  | | Complete with chuck, live centre and top slide (for taper turning). | | | |
|
| | |  | | Accessories for the lathe PD 230/E MICROMOT (also compatible with its predessor PD 210). | | | |
|
|
| |  | | Accessories for the lathe PD 230/E MICROMOT (also compatible with its predessor PD 210). | | | |
|
| | | | | Accessories for the lathe PD 230/E MICROMOT (also compatible with its predessor PD 210). | | | |
|
|
| |  | | Accessories for the lathe PD 230/E MICROMOT (also compatible with its predessor PD 210). | | | |
|
| | |  | | Used for highest accuracy with high rotational precision. | | | |
|
|
| |  | | Capacity to 10mm, with key and MT1, for tailstock. | | | |
|
| | |  | | Same as Gear Chuck (product No. 24070), but with 10mm arbor, for mill/drill unit | | | |
|
|
| |  | | Set includes column (35 x 400mm), mounting bracket and bolts. | | | |
|
| | |  | | A small, high accuracy machining system to mill, drill and bore. | | | |
|
|
| |  | | The MICRO miller FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron aluminium, brass and plastic. | | | |
|
| |
| |  | | Includes 1 each of 2.4 - 3.0 - 3.2 - 4.0 and 5.0mm, for round stock. Supplied in a wooden box and lid. | | | |
|
| | |  | Lathe accessories for PD 230/E and PD 400.
Nearly all the components are supplied in superb wooden boxes. | | | |
|
|
| |  | Lathe accessories for PD 230/E and PD 400.
Nearly all the components are supplied in superb wooden boxes. | | | |
|
| | |  | Lathe accessories for PD 230/E and PD 400.
Nearly all the components are supplied in superb wooden boxes. | | | |
|
|
| |  | | Consists of 2 step blocks and 2 clamps, 2 nuts, 2 T-slot nuts: B = 7, E = 12, D = 4 and C=7.2mm) secures objects to approx. 35 mm high. | | | |
|
| | | | | One each roughing out, parting, finishing cut, left and right cutter. | | | |
|
|
| |  | | One cutter for external thread (ground to 608, metric) one for internal thread, one general cutting. | | | |
|
| | |  | | Used in the PD 400 quick change system. | | | |
|
|
| | | | | Three holders for roughing out (70mm), longitudinal work (70mm) and 90mm boring bar, holes from 12mm. | | | |
|
|
| | | | Ten piece set for holders 24555 and 24556 | | | |
|
| | |  | | Used to clamp various workpieces. Made from hardened steel, precision ground in pairs. | | | |
|
|
| | | Including 2 holders. Provides quick tool changes with easy height adjustment.
No 24145 | | | |
|
| | |  | | The jaws are not independently adjustable, i.e. they are self centering. | | | |
|
|
| |  | | Used to mount irregularly and asymmetrically shaped objects. | | | |
|
| | |  | | This accessory is used in the place of the standard chuck and mounts larger and asymmetrical workpieces. | | | |
|
|
| |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
| | |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
|
| |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
| | |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
|
| |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
| | |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
|
| |  | | Carefully thought-out accessories for the PD 400 solve milling and turning problems. | | | |
|
| | |  | | Precision work to 0.05mm accuracy is easy! | | | |
|
|
| | | | Precision work to 0.05mm accuracy is easy! | | | |
|
| | |  | | Precision work to 0.05mm accuracy is easy! | | | |
|
|
| | | | Precision work to 0.05mm accuracy is easy! | | | |
|
| | |  | | Complete work centre for milling and drilling. | | | |
|
|
| |  | | Compound Table for milling and drilling. | | | |
|
| | |  | | High strength precision die cast aluminium, with machined guides, fittings and work table. | | | |
|
|
| | | | High Speed Steel End Mill | | | |
|
| |
Precision Machines & Accessories
