The MICRO miller FF 230 is a small, accurate milling system used to mill, drill and countersink steel, cast iron aluminium, brass and plastic. The headstock swivels through 3608, indicated on a scale. Height is adjusted via a zero adjustable handwheel, also used as fine feed when milling. One revolution equals 1mm travel, 1 division equals 0.05mm. The quill and headstock may be locked in position, essential when milling. The powerful permanent magnet motor effects drive via a poly-v belt, yielding high torques, especially at lower speeds. Collets of 6, 8 and 10mm are included. The solid table is T-slotted to the MICROMOT norm of 12 x 6 x 5mm.
Handwheel serves as both height adjustment and mill fine feed.
Poly-V drive system offers 6 speeds between 280 and 2,500rpm.
The fine step feed, clamps and cutter are not included.
Handwheels with zero adjustable scale, 1 rev = 1mm, 1 division = 0.05mm.
Technical Data: The 140W motor accepts 220-240V, 50/60Hz. Spindle speeds of 280, 550, 870, 1,250, 1,700 and 2,500rpm are achieved by pulleys and a belt. Table size 270 x 80mm, column 35mm x 400mm long. X-Y travel is 170mm x 65mm. Maximum height 180mm and depth 130mm. Overall height approx. 500mm. Weight approx. 17kg. No 24108
MICRO miller FF 230
